FileMgr

✏️ /usr/src/linux-headers-6.8.0-124/drivers/usb/Kconfig

✕ Tutup

# SPDX-License-Identifier: GPL-2.0
#
# USB device configuration
#

config USB_OHCI_BIG_ENDIAN_DESC
	bool

config USB_OHCI_BIG_ENDIAN_MMIO
	bool

config USB_OHCI_LITTLE_ENDIAN
	bool
	default n if PPC_MPC52xx
	default y

config USB_EHCI_BIG_ENDIAN_MMIO
	bool

config USB_EHCI_BIG_ENDIAN_DESC
	bool

config USB_UHCI_BIG_ENDIAN_MMIO
	bool

config USB_UHCI_BIG_ENDIAN_DESC
	bool

menuconfig USB_SUPPORT
	bool "USB support"
	depends on HAS_IOMEM
	default y
	help
	  This option adds core support for Universal Serial Bus (USB).
	  You will also need drivers from the following menu to make use of it.

if USB_SUPPORT

source "drivers/usb/common/Kconfig"

config USB_ARCH_HAS_HCD
	def_bool y

config USB
	tristate "Support for Host-side USB"
	depends on USB_ARCH_HAS_HCD
	select GENERIC_ALLOCATOR
	select USB_COMMON
	select NLS  # for UTF-8 strings
	help
	  Universal Serial Bus (USB) is a specification for a serial bus
	  subsystem which offers higher speeds and more features than the
	  traditional PC serial port.  The bus supplies power to peripherals
	  and allows for hot swapping.  Up to 127 USB peripherals can be
	  connected to a single USB host in a tree structure.
	  
	  The USB host is the root of the tree, the peripherals are the
	  leaves and the inner nodes are special USB devices called hubs.
	  Most PCs now have USB host ports, used to connect peripherals
	  such as scanners, keyboards, mice, modems, cameras, disks,
	  flash memory, network links, and printers to the PC.

Say Y here if your computer has a host-side USB port and you want
	  to use USB devices.  You then need to say Y to at least one of the
	  Host Controller Driver (HCD) options below.  Choose a USB 1.1
	  controller, such as "UHCI HCD support" or "OHCI HCD support",
	  and "EHCI HCD (USB 2.0) support" except for older systems that
	  do not have USB 2.0 support.  It doesn't normally hurt to select
	  them all if you are not certain.

If your system has a device-side USB port, used in the peripheral
	  side of the USB protocol, see the "USB Gadget" framework instead.

After choosing your HCD, then select drivers for the USB peripherals
	  you'll be using.  You may want to check out the information provided
	  in <file:Documentation/usb/> and especially the links given in
	  <file:Documentation/usb/usb-help.rst>.

To compile this driver as a module, choose M here: the
	  module will be called usbcore.

config USB_PCI
	bool "PCI based USB host interface"
	depends on PCI
	default y
	help
	  Many embedded system SOCs (e.g. freescale T2080) have both
	  PCI and USB modules with the USB module directly controlled by
	  registers and having no relationship to the PCI module.

If you have such a device you may say N here and PCI related code
	  will not be built in the USB driver.

config USB_PCI_AMD
	bool "AMD PCI USB host support"
	depends on USB_PCI && HAS_IOPORT
	default X86 || MACH_LOONGSON64 || PPC_PASEMI
	help
	  Enable workarounds for USB implementation quirks in SB600/SB700/SB800
	  and later south bridge implementations. These are common on x86 PCs
	  with AMD CPUs but rarely used elsewhere, with the exception of a few
	  powerpc and mips desktop machines.

if USB

source "drivers/usb/core/Kconfig"

source "drivers/usb/mon/Kconfig"

source "drivers/usb/host/Kconfig"

source "drivers/usb/renesas_usbhs/Kconfig"

source "drivers/usb/class/Kconfig"

source "drivers/usb/storage/Kconfig"

source "drivers/usb/image/Kconfig"

source "drivers/usb/usbip/Kconfig"

endif

comment "USB dual-mode controller drivers"

source "drivers/usb/cdns3/Kconfig"

source "drivers/usb/fotg210/Kconfig"

source "drivers/usb/mtu3/Kconfig"

source "drivers/usb/musb/Kconfig"

source "drivers/usb/dwc3/Kconfig"

source "drivers/usb/dwc2/Kconfig"

source "drivers/usb/chipidea/Kconfig"

source "drivers/usb/isp1760/Kconfig"

comment "USB port drivers"

if USB

source "drivers/usb/serial/Kconfig"

source "drivers/usb/misc/Kconfig"

source "drivers/usb/atm/Kconfig"

endif # USB

source "drivers/usb/phy/Kconfig"

source "drivers/usb/gadget/Kconfig"

source "drivers/usb/typec/Kconfig"

source "drivers/usb/roles/Kconfig"

endif # USB_SUPPORT

Batal

⬅ drivers 28 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
📁 atm	dir	—	15/06/26 13:45	0755	📂
📁 c67x00	dir	—	15/06/26 13:45	0755	📂
📁 cdns3	dir	—	15/06/26 13:45	0755	📂
📁 chipidea	dir	—	15/06/26 13:45	0755	📂
📁 class	dir	—	15/06/26 13:45	0755	📂
📁 common	dir	—	15/06/26 13:45	0755	📂
📁 core	dir	—	15/06/26 13:45	0755	📂
📁 dwc2	dir	—	15/06/26 13:45	0755	📂
📁 dwc3	dir	—	15/06/26 13:45	0755	📂
📁 early	dir	—	15/06/26 13:45	0755	📂
📁 fotg210	dir	—	15/06/26 13:45	0755	📂
📁 gadget	dir	—	15/06/26 13:45	0755	📂
📁 host	dir	—	15/06/26 13:45	0755	📂
📁 image	dir	—	15/06/26 13:45	0755	📂
📁 isp1760	dir	—	15/06/26 13:45	0755	📂
📁 misc	dir	—	15/06/26 13:45	0755	📂
📁 mon	dir	—	15/06/26 13:45	0755	📂
📁 mtu3	dir	—	15/06/26 13:45	0755	📂
📁 musb	dir	—	15/06/26 13:45	0755	📂
📁 phy	dir	—	15/06/26 13:45	0755	📂
📁 renesas_usbhs	dir	—	15/06/26 13:45	0755	📂
📁 roles	dir	—	15/06/26 13:45	0755	📂
📁 serial	dir	—	15/06/26 13:45	0755	📂
📁 storage	dir	—	15/06/26 13:45	0755	📂
📁 typec	dir	—	15/06/26 13:45	0755	📂
📁 usbip	dir	—	15/06/26 13:45	0755	📂
📄 Kconfig	file	4.1 KB	10/03/24 20:38	0644	✏️ ⬇
📄 Makefile	file	1.8 KB	26/05/26 09:55	0644	✏️ ⬇

✏️ Rename

🔑 Ubah Permission